- M-SERIES
- Effect Pedals
- Hand-Built Effect Pedals
- Multi-Effects
- Pedal Power Supply
- Music Light
- Pedal Tuner
- Accessories
- Bass Effect Pedal
LATEST NEWS
- 2017 MUSIC SHOW CHINA
- 2017-9-18 NEW PRODUCTS
- 2017-4-27 NEW PRODUCTS
- 2017-2-28 NEW PRODUCTS
- 2017-2-10 NEW PRODUCTS
- 2016-6-18 new products- Nano power sta
CONTACT US
- ADD:
- TEL: 086-18682010696
- FAX: 18682010696
- E-mail: info@moskyaudio.com
> Bass Effect Pedal
XT ULTRA
- BASS PREAMP DI
- BASS EQ
- Product description: Bass preamplifier+EQ+Distortion+DI
PRODUCT INTRODUCTION
MOSKYAUDIO BETA ULTRA
Based on Darkglass Microtubes X Ultra
Microtubes Xt Ultra Bass Preamp Pedal
Bass Preamp Pedal, with Variable Lowpass/Highpass Filters, 6-band Graphic EQ, Drive, Mix, and Mid Controls, Cab Simulation, and XLR DI Output.
Multiband Distortion
The Microtubes XT Ultra allows you to select exactly what
frequencies you want to compress and saturate for the low
and treble respectively, but with four major additions providing
an additional layer of flexibility, while maintaining the same
compact footprint, making it an extremely complete tool for
the modern bassist.
Controls
High Pass Frequency: Controls the cutoff frequency to be
distorted, ranging from 100Hz (for thicker, fuzzier saturation)
or 1kHz for ultra-sharp definition.
High Drive: Sets the amount of distortion for the high pass side.
High Level: Sets the output volume of the distorted high-pass signal.
Low Pass Frequency: Controls the cut-off frequency to be
mixed back to the high-pass side. Ranging from 50Hz (for only
sub-bass) and 500Hz to preserve some clean mids.
Low Comp: Controls compression amount for the low band.
Both threshold and makeup gain are controlled to maintain a
constant level.
Low Level: Sets the output volume of the low-pass signal.
Sliders
Master: +-12 dB. Sets the overall volume of the unit.
Low shelf: +-12 dB @ 80 Hz.
250 Hz / 500 Hz / 1,5 kHz / 3 kHz: +-12dB.
High shelf: +-12 dB @ 5 kHz.
Direct Output: Balanced XLR output for connecting the pedal
to a other device, etc.
Ground lift: Disconnects the signal ground on the Direct
Output to break any ground loops. Set this switch to either
position that has less noise. The switch does not affect the ¼”
output.
Cab Sim: Toggle the cabinet simulation on/off on the Direct
Output.
Headphones: 3.5mm stereo jack output.
Technical Specifications
Balanced XLR output with switchable cabinet simulation and
switchable ground lift.
Input Impedance 1M
Output Impedance 1k
Current Consumption ~ 200 mA
Voltage 9V DC (Center Negative)
Dimensions
Width 125 mm (4.92 in)
Height 96 mm (3.77 in)
Depth 57 mm (2.24 in)
Weight 430 gr (0.94 lb)
PREVIOUS：MSVP MAX
No next
RELATED PRODUCTS
-
FIREWORKS
BASS DIRVE+DI BASS EFFECT PEDAL...
-
GAMMA
Bass Preamp...
-
Beta Ultra
Bass preamplifier+EQ+Distortion+DI...
mosky